|
 |
Specialize in machining including lathe and mill,
welding with MIG, TIG, arc, torch, and brazing.
Custom fabrication of steel and aluminum, also
composit work with carbon, kevlar and fiber glass.
Custom machining, and repairs, tube bending.
Materials we work with include:
* Aluminum
* Crome-moly
* Carbon Steel
* Stainless Steel
Sheet metal
Round tubing
Square tubing
Steel Mesh
Carbon fiber and fiber glass
Also,
ANODIZING ALUMINUM
PROP MAKING
* Using foam, wood, fabric; shaping,
painting and mounting,
* signage with foam board, lighting
* wooden signage
* printed banners, signs
We custom manufacture steel weight lifting
machines, i.e., squat racks, bench, calf raise
machine, etc. Gates, fences, benches, light
standards, stadium railings, commercial plant
stands
competitive racing bicycles for road, track,
mountain, cyclecross, and unicycles.
SHOP EQUIPMENT
* Mill
* Lathe (15 x 40)
* Drill Press
* Band Saw
* Welding jigs
* Alignment table
* Heliarc
* 30" x 40" heat press
* Welder: MIG, TIG, torch. |
 | 
|  |  |
| Square tubing. |
Angle Iron. |
Round Tubing. |
Diamond Plate, and Sheet Metal. |
 | 
|  |
| "Telescope". |
"Telescope detail. All parts manufactured and machined. |
Bicycle Racing Pursuit Bicycle: Frame built with XYZ tubing, custom handlebars with XYZ tubing. Components all Campy. |
 | 
|  |
| "Bicycle Racing Pursuit Bars". |
"Foam fabricated props for trade show. |
All Steel Squat Rack. Holds one million pounds. |
 | 
| |
| "SuperBike" We created the prototype for this frame used in the Atlanta Summer Olympics |
John R. Waite Custom Cycles |
Bicycle Racing Pursuit Bicycle: Frame built with XYZ tubing, custom handlebars with XYZ tubing. Components all Campy. |
 | 
|  |
Roofing Scaffold
The need was for a suitable and safe scaffold made of welded steel 4'W x 8'L x 6'H with 3/4 plywood top made to support the weight of three people doing roofing on a steep part of roof.
It was easier nailing roofing material as high as 5'up from bottom edge of our "Barn" roof. Once the roof was finished, the scaffold legs were shortened to be used inside for drywalling (see photo
at right). |
Scaffold Table
The legs on this welded steel platform were cut down to 4' height to be used as scaffold inside for installing drywall on a vaulted ceiling.
Once drywall is finished, we will shorten the legs to 35" (under 3') to table height so it can be used as a fabric cutting table for our costume design studio. The plywood will be removed and
replaced with a sheet of 4' x 8' melimine for a cleaner working surface (final photo coming soon). |
Another View Of Scaffold: A safer alternative to moving ladders. John put an inch and a half hole at each end of table top to put in the drywall support poles where we didn't
have to hold them then we could crank the handle and hoist the 4' x 12' sheets of drywall right up to the ceiling and once locked in, held it, handsfree to ceiling. |
TO PLACE AN ORDER
The best way is to contact us directly. We have a direct e-mail link (JohnW8@aol.com)
on this page as well as a direct phone number (760) 240-2862 or (323) 240-9162
Business hours are Monday through Friday 10am - 6pm Pacific Time.
When you make the initial contact with us, we can discuss all the details of your project. Payment method: credit card, business check, cashier's check or money order. Normally 50% down payment
is required to start with the balance due before final shipment of completed items. We will also provide you with a printed bid/work order verifying all aspects of the project including
projected pricing informationm, we only request that you provide us with all details drawings, artwork, etc.
We understand your deadlines are critical, they are critical to us as well. We will assist you in every aspect of the project.
Gold Eagle Enterprises
e-mail: Johnw8@aol.com or (760) 240-2862 or (323) 240-9162
2010
John R. Waite
|
 |
WEB SITE
by
JOHN WAITE |
Cirque Du Soliel costumes, Cirque Du Soliel pole climbing apparatus, Cirque pole climbing, Cirque retractable poles, Costumes for Cirque Du Soliel,
tradeshow props, props for trade shows, Specialize in machining including lathe and mill, welding with MIG, TIG, arc, torch, and brazing, Custom fabrication of steel and aluminum,
composit work with carbon, kevlar, and fiber glass, Custom machining, and repairs, tube bending, Aluminum, Crome-moly, Carbon Steel, Stainless Steel, steel weight lifting
machines, i.e., squat racks, bench, calf raise, machine, Gates, fences, benches, light standards, stadium railings, commercial plant stands, competitive racing bicycles for road, track,
mountain, cyclecross, unicycles, as well as hand cycles for disabled athletes, John R. Waite, john waite, trade show props, prop making for trade shows, prop making for film productions,
metal fabrications, fiber glass fabrications
|
|
